BRAKES
FRONT BRAKE PADS - ALL MODELS
Service repair no - 70.40.02
Remove
1.
2.
Remove front road wheels .
Clean exterior of calipers.
Refit
8.
9.
Fit brake pads.
Fit pad retaining pins and anti-rattle springs.
Secure with new split pins.
10.
11.
Apply service brake pedal several times to locate
pads.
Fit road wheels. Tighten wheel nuts to correct
torque:
3.
4.
Remove split pin from retaining pins.
Remove pad retaining pins and anti-rattle
springs.
Alloy wheels - 130 Nm (96 lbf/ft)
Steel wheels - 100 Nm (80 lbf/ft)
Heavy duty wheels - 170 Nm (125 lbf/ft)
12. Check fluid reservoir. Top up if necessary, using
correct grade of fluid See LUBRICANTS,
FLUIDS AND CAPACITIES, Information,
Recommended lubricants and fluids .
5.
6.
Remove brake pads.
Clean exposed parts of pistons, using new brake
fluid. Wipe away excess with a lint free cloth.
Using piston clamp LRT-70-500 press each
piston back into its bore. Ensure that displaced
brake fluid does not overflow from reservoir.
7.
REV: 09/97
REPAIR
7
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)