STEERING
15.
16.
Centralise steering box See Adjustment,
Centralise steering box .
Align steering wheel, if necessary.
CAUTION: A drag link that is damaged or
bent must be renewed. DO NOT attempt
repair.
17.
18.
Fit drag link to swivel housing arms and tighten
nuts to 40 Nm (30 lbf/ft). Fit new split pins.
Ensure full steering travel is obtained between
lock stops See Adjustment, Steering lock
stops . Adjust drag link length to suit.
Tap ball joints in direction shown so both pins
are in same angular plane.
19.
20.
21.
Tighten clamp bolts to 14 Nm (10 lbf/ft).
Refit road wheel and remove axle stands or
vehicle from ramp.
22.
23.
Road test vehicle.
If driving straight ahead and steering wheel is
offset by 0° ± 5° in either direction, correct by
adjusting drag link length.
WARNING: To correct steering wheel
deviations greater than ± 5 ° remove and
reposition steering wheel See Steering
wheel .
REPAIR
15
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)