1996 Land Rover Defender Worshop Manual 300 Tdi

12
ENGINE
FLYWHEEL HOUSING
Service repair no - 12.53.01
Remove
Refit
9.  Clean rear face of housing and mating face on
block, ensuring all old sealant is removed.
1.
2.
Disconnect battery.
Remove gearbox.  See MANUAL GEARBOX,
Repair,  R380 gearbox
3.
Remove clutch.  See CLUTCH, Repair, Clutch
assembly
4.
5.
Remove flywheel.  See  Flywheel
Remove 3 fixings and withdraw starter motor.
10.
11.
Apply sealant to flywheel housing mating face on
cylinder block.
Fit housing to cylinder block. Tighten retaining
bolts to 45 Nm (33 lbf/ft).
12.
13.
14.
15.
Remove surplus sealant from block.
Fit starter motor.
Fit flywheel.  See  Flywheel
Fit clutch.  See CLUTCH, Repair, Clutch
assembly
6.
7.
Remove 2 bolts from top of flywheel housing.
Remove 4 bolts securing bottom of flywheel
housing to engine mounting brackets.
16.  Fit gearbox.  See MANUAL GEARBOX, Repair,
R380 gearbox
17.  Reconnect battery.
8.
Remove inner bolts and lift off flywheel housing.
18
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field