1996 Land Rover Defender Worshop Manual 300 Tdi

ELECTRICAL
MAIN LIGHT SWITCH
Service repair no - 86.65.10
Remove
HEATED REAR SCREEN, REAR FOG LAMP AND
HAZARD WARNING SWITCHES
Service repair no - 86.65.36 - Heated rear screen
Service repair no - 86.65.65 - Rear fog lamp
Service repair no - 86.65.50 - Hazard warning
1.
Remove steering column nacelle See
STEERING, Repair,  Steering column nacelle.
Remove
2.
3.
Disconnect main light switch multi-plug from
main harness.
Slacken locknut and release light switch from
slot in mounting bracket.
Refit
4.
5.
6.
Fit light switch in mounting bracket.
Reconnect switch multi-plug.
Fit steering column nacelle See STEERING,
Repair,  Steering column nacelle.
1.
Remove 2 screws and withdraw switch panel
from lower fascia.
2.
3.
Disconnect multi-plug from rear of switch.
On hazard warning switch only, remove 2
separate leads.
4.
Press in spring retainers and withdraw switch
from switch panel.
Refit
5.
6.
Fit new switch into switch panel.
Reconnect switch multi-plug, and leads if
applicable.
7.
Fit switch panel to lower fascia.
REPAIR
21
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field