1996 Land Rover Defender Worshop Manual 300 Tdi

WIPERS AND WASHERS
WIPER MOTOR AND DRIVE RACK
Service repair no - 84.15.09
Remove
1.
2.
Disconnect battery.
Remove wiper arms.
NOTE: Operations 3 - 5 are for RH drive
vehicles only.
3.
Prise Land Rover decal from grab handle and
remove screw.
4.
5.
Remove lower screw and lift handle from fascia.
Remove screw fixing finisher to wiper motor
cover.
6.
Remove door check strap cover, remove 3
screws and withdraw wiper motor cover. If
applicable, disconnect switch multi-plugs and/or
radio speaker leads.
7.
8.
Disconnect multi-plug from wiper motor.
Disconnect wiper motor earth lead. (Not
applicable on later models)
Refit
9.
Lift rubber sleeve and slacken wiper motor to
drive tube nut.
13.  Feed wiper motor drive rack into tube until fully
seated.
14.  Loosely fit drive tube securing nut.
15.  Fit wiper motor securing strap, earth tag and
mounting pad. Align motor and tighten fixing
screws.
10.
Remove 2 screws and release wiper motor
retaining strap.
Fully unscrew tube nut.
Pull wiper motor and drive rack clear of tube and
retrieve mounting pad and earth tag.
11.
12.
REPAIR
1
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field