80
HEATING AND VENTILATION
HEATER CONTROL CABLE - AIR DISTRIBUTION
Service repair no - 80.10.12
Remove
1.
2.
Disconnect battery.
Remove steering wheel See STEERING,
Repair, Steering wheel.
3.
4.
5.
6.
7.
Remove steering column nacelle See
STEERING, Repair, Steering column nacelle.
Remove instrument panel See INSTRUMENTS,
Repair, Instrument panel.
Remove retaining screws and pull off air
distribution and temperature control lever knobs.
Remove 3 screws and detach side cover,
complete with control lever assembly.
Remove 2 screws securing control lever
assembly to side cover and remove cover. Note
plastic screw spacers fitted between cover and
control lever assembly and retain.
8.
9.
Remove small bolt and release outer cable
retaining clip.
Slacken grub screw and release inner cable from
clevis.
10.
Remove lower fascia panel assembly See
CHASSIS AND BODY, Repair, Lower fascia
panel (heater duct) assembly.
11. Remove 19 screws and lift off heater duct cover.
12.
Slacken vent flap trunnion fixing, release air
distribution control cable and remove from
heater duct.
13.
Check condition of foam sealant on heater duct
cover and renew if necessary.
6
REPAIR
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |