CHASSIS AND BODY
REAR HEADLINING - 90 STATION WAGON
Service repair no - 76.64.11
Remove
5. Release front corners of headlining from cant
rail, on both sides.
6. Pull headlining forwards sufficiently to clear rear
end lining mounting brackets.
7. Release rear corners of headlining from cant rail,
on both sides.
1.
2.
3.
Remove side trim panels See Side trim panel .
Remove rear end lining See Rear end lining .
Remove rear interior lamp See ELECTRICAL,
Repair, Interior lamp .
Carefully prise out 5 trim studs securing rear and
front headlining to roof mounting brackets.
8. Lower rear headlining from roof and remove
from vehicle.
NOTE: Take care not to bend headlining
on removal and refitting.
4.
Refit
9.
12. Position front edge of rear headlining over front
headlining and secure with trim studs.
13. Adjust rear headlining to achieve good fit at all
corners.
With assistance, position rear headlining to roof
and locate rear corners in cant rail.
10.
11.
Push headlining rearwards and position over
rear end lining mounting brackets.
Locate front corners of headlining in cant rail.
14. Fit rear interior lamp See ELECTRICAL,
Repair, Interior lamp .
15. Fit rear end lining See Rear end lining .
16.
Fit side trim panels See Side trim panel .
REPAIR
27
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)