CHASSIS AND BODY
ACCESS PANEL - FRONT UNDERTRAY
ACCESS PANEL - REAR UNDERTRAY
Service repair no - 76.11.84
Service repair no - 76.11.85 - Access panel
Service repair no - 76.11.83 - Acoustic pad
The access panel is provided in the rear undertray to
enable fitment of the wading plug or timing tool
LRT-12-044 in the flywheel housing, and access to
the engine oil sump drain plug.
The access panel is provided in the front undertray to
enable fitment of the wading plug into the engine
timing cover.
Remove
Remove
1.
Raise vehicle on ramp.
1. Raise vehicle on ramp.
2.
Remove 5 bolts securing access panel to front
undertray.
2. Rotate access panel anti-clockwise to release
locking flanges.
3.
4.
Remove access panel.
If necessary, remove 5 fasteners and release
acoustic pad from access panel.
3. Remove access panel from undertray.
Refit
Refit
4. Locate access panel flanges in undertray
apertures.
5.
6.
If applicable, fit acoustic pad to access panel.
Fit access panel to front undertray, Tighten
fixings to 14 Nm (10 lbf/ft).
5. Rotate panel clockwise to secure in undertray.
6. Lower ramp.
7.
Lower ramp.
REPAIR
39
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)