1996 Land Rover Defender Worshop Manual 300 Tdi

57
STEERING
DRAG LINK AND DRAG LINK ENDS
Service repair no - 57.55.17
Remove
4.  Remove front road wheel.
Disconnect steering damper at drag link bracket.
6.  Remove split pin and castellated nut securing
drag link ball joints to swivel housing arms.
7.  Disconnect drag link ball joints using
LRT-57-018.
5.
1.
Park vehicle on level ground and chock rear
wheels.
8.  Remove drag link.
9.  Slacken clamp bolts.
2.
3.
Set road wheels in straight ahead position.
Raise vehicle and fit axle stands or use a ramp.
10.  Unscrew ball joints and remove from drag link.
11.  Clean internal threads of drag link.
12.
13.
14.
Fit new ends to drag link and loosely fit clamp
bolts.
Set ball joints to drag link measurement to 28,5
mm.
Adjust ball pin centres to nominal length of 924
mm, this length is adjusted during refit.
14
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field