57
STEERING
STEERING COLUMN NACELLE
Service repair no - 57.40.29
Remove
DROP ARM
Service repair no - 57.50.14
Remove
1.
2.
Disconnect battery.
Remove steering wheel See Steering wheel .
1. Park vehicle on level surface and chock rear
wheels.
2.
3.
Raise vehicle and locate axle stands or use a
ramp.
Disconnect steering damper from drag link See
Steering damper .
3.
4.
Remove 5 screws and 2 self tapping screws and
lift top half of nacelle from steeering column
switch assembly.
Ease bottom half of nacelle from switch
gaiters/grommets. Remove lower nacelle.
4.
5.
Disconnect drag link ball joint from drop arm
using extractor LRT-57-018.
Mark drop arm and steering box for reassembly.
Refit
5.
Locate top half of nacelle in position and fit to
switch assembly gaiters/grommets.
Locate lower half of nacelle and loosely fit
retaining screws.
6.
7.
Ensure switch gaiters/grommets are correctly
located and nacelle is aligned with switch
assembly brackets.
8.
9.
10.
Fully tighten screws.
Fit steering wheel See Steering wheel .
Reconnect battery.
6.
7.
Bend back tabs on locking washer, slacken
retaining nut, but do not remove.
Fit extractor LRT-57-012 and release drop arm
from steering box spline.
10
REPAIR
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)