1996 Land Rover Defender Worshop Manual 300 Tdi

76
CHASSIS AND BODY
CUBBY BOX - 90/110 STATION WAGON
Service repair no - 76.25.04
Remove
REAR GRAB HANDLE - 90/110 STATION WAGON
Service repair no - 76.58.35
Remove
1.
Remove radio/cassette player, if fitted.
1.
2.
Carefully prise top and bottom edges of finisher
caps from grab handle and then hinge outwards
to gain access to fixing screws.
Remove 4 fixing screws and detach grab handle
from rear end trim panel.
Refit
3.
Position grab handle on rear end trim panel and
secure with 4 fixing screws.
Press finisher caps over screws.
2.
Open cubby box lid and remove 2 caps
concealing fixing bolts.
Remove fixing bolts and washers.
Remove 2 screws and lift cup holder from cubby
box.
4.
3.
4.
5.
6.
Unscrew 2 bolts securing front of cubby box to
floor mounting.
Lift cubby box and, if applicable, release
radio/cassette player leads.
7.
If fitted, disconnect multi-plug from EGR control
unit, located on base of cubby box.
Remove cubby box.
8.
Refit
9.
Position cubby box to mounting and, if
applicable, insert radio/ cassette player leads.
Secure front of cubby box to floor and fit cup
holder.
Open cubby box lid, secure in position, and fit
bolt caps.
10.
11.
12.
Fit radio/cassette player, if fitted.
24
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field