1996 Land Rover Defender Worshop Manual 300 Tdi

MANIFOLD AND EXHAUST SYSTEM
TAILPIPE - 90
TAILPIPE - 110/130
Service repair no - 30.10.22
Remove
Service repair no - 30.10.22
Remove
1.
2.
Raise vehicle on ramp.
Remove 2 flange nuts securing tail pipe to
intermediate pipe, see J6243.
1.  Raise vehicle on ramp.
2.  Remove 2 flange nuts securing tail pipe to
intermediate pipe, see J6244.
3.
4.
Release tail pipe from inboard mounting rubber.
Release tail pipe from outboard mounting rubber
and remove.
3.  Release tail pipe from front mounting rubber.
4.  Release tail pipe from rear mounting rubber.
5.  Release tail pipe from intermediate pipe and
feed over rear axle.
Refit
6.  Remove tail pipe.
5.
6.
7.
Fit tail pipe to intermediate pipe.
Secure tail pipe to mounting rubbers.
Secure tail pipe to intermediate pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
Refit
7.  Feed tail pipe over rear axle and connect to
intermediate pipe.
8.
Lower vehicle.
8.  Secure tail pipe to mounting rubbers.
9.
Secure tail pipe to intermediate pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
10.
Lower vehicle.
REPAIR
5
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field