1996 Land Rover Defender Worshop Manual 300 Tdi

CHASSIS AND BODY
20.
21.
22.
23.
Remove 2 screws and remove both footwell
vents from lower fascia panel.
Remove single screw and detach door check
strap cover from LH and RH doors.
Remove 3 screws securing wiper motor cover to
fascia bulkhead.
Release locating pins from fascia panel, lower
wiper motor cover and, if applicable, disconnect
radio speaker leads. Retain wiper motor rack
cover. On LH drive vehicles, disconnect
multi-plugs from rear of switch panel.
Prise out 2 large and 5 small cap fasteners
securing trim panel to parcel shelf and fascia
bulkhead.
15.
If fitted, remove 2 screws, washers and nuts
securing auxiliary switch panel to lower fascia
panel and switch cover.
Withdraw switch panel and disconnect switch
leads.
Remove 2 screws securing switch cover to
parcel tray.
Remove fuse box cover.
16.
17.
18.
19.
24.
25.
Models with hand throttle:
Remove fuse box LH retaining screw.
Pivot fuse box down to gain access to lower
inner hand throttle cover fixing screw.
Remove 4 screws and lift up hand throttle cover
from lower fascia panel.
Carefully fold back trim panel to clear fresh air
vent operating levers and remove panel from
parcel shelf.
REPAIR
35
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field