ENGINE TUNING DATA
300
Tdi ENGINE
Type................................................................................. 2.5 Litre Turbo diesel intercooled
Firing order ..................................................................... 1-3-4-2
Injection timing............................................................... 1,54 mm lift at T.D.C.
Injection timing with electronic EGR ............................ 1,40 mm lift at T.D.C.
Timing marks:
Valve timing - manual....................................................... Slot for pin in flywheel and TDC mark on front pulley.
Injection timing ................................................................. Timing pin (service tool)
Tappet clearances inlet and exhaust ............................... 0,20 mm cold
Valve timing:
Inlet
Exhaust
-
-
-
-
Opens ............................................................................ 16° B.T.D.C.
51° B.B.D.C.
13° A.T.D.C.
109° B.T.D.C.
9,97 mm
Closes ............................................................................ 42° A.B.D.C.
Peak............................................................................... 103° A.T.D.C.
Lift .................................................................................. 9,67 mm
Maximum governed speeds:
-
-
-
No load (neutral/full throttle)........................................... 4600 + 40 - 120 rev/min
Idle speed at running temperature ................................. 720 ± 20 rev/min
Die-down time ................................................................ 4 seconds
INJECTION PUMP
Make & type - standard .................................................... Bosch rotary R509 type with boost control and two
speed mechanical governor with auto advance and
solenoid electrical shut-off. Tamper proof sealing on,
no load governed speed and fuel adjustment screws.
Constant volume delivery valves
Make & type - Electronic EGR ......................................... Bosch rotary R509/1 type with boost control and two
speed mechanical governor with auto advance and
solenoid electrical shut-off. Tamper proof sealing on
flight speed and fuel adjustment screws. Constant
volume delivery valves. Throttle position sensor for
EGR control.
HEATER PLUGS
Make & type ..................................................................... Probe type, No.0100226129A Beru 12 volts
Time to reach operating temperature of 850° C ............... 8 seconds
INFORMATION
1
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |