1996 Land Rover Defender Worshop Manual 300 Tdi

CHASSIS AND BODY
FRONT SEAT BELTS
Service repair no - 76.73.13
Remove
5.
Move rear carpet aside and remove bolt
securing inertia reel to base of ’B’ post.
1.
2.
Remove plastic seat belt guide from side of front
seat base.
Remove seat belt lower anchorage bolt.
6.
Remove seat buckle stalk anchorage bolt at
inside rear of front seat.
Refit
NOTE: Tighten all seat belt anchorage
bolts to 32 Nm (24 lbf/ft).
7.
8.
Fit seat buckle stalk to mounting at rear of front
seat.
Position inertia reel to base of ’B’ post and
secure with bolt.
3.
4.
Remove plastic cap from upper belt guide bolt.
Remove bolt securing belt guide to ’B’ post.
9.
10.
11.
12.
Reposition carpet.
Fit upper guide to ’B’ post.
Fit plastic cap to guide bolt.
Fit seat belt to seat base lower anchorage
bracket.
13.
Fit plastic seat belt guide to seat base.
REPAIR
19
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field