308
STARTING AND OPERATING
PARKING BRAKE
WARN ING!
To set the parking brake, pull the lever up as firm ly as
possible. When the parking brake is applied with the
ignition ON, the “Brake Warning Light” in the instru -
ment cluster will light. To release the parking brake, pull
up slightly, press the center button, then lower the lever
completely.
Abrasive material in any part of the brak es may cause
excessive wear or unpred ictab le brak ing. You migh t
not have full brak ing power when you need it to
preven t an accid ent. If you have been operatin g you r
veh icle in dirty condition s, get you r brak es checked
and clean ed as necessary.
NOTE: The instru ment cluster “Brake Warning Light”
ind icates only that the parking brake is applied. You must
be sure the parking brake is fully applied before leaving
the vehicle.
•
If you experience unu sual vibration after driving in
mud, slush, or similar cond itions, check the wheels for
impacted material. Impacted material can cause a
wheel imbalance and freeing the wheels of it will
correct the situ ation.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)