MAINTAINING YOUR VEHICLE
433
To minim ize the possibility of scratching the lenses and
red ucing light output, avoid wiping with a dry cloth. To
rem ove road dirt, wash with a mild soap solu tion fol-
lowed by rinsing.
Clean ing Plastic Instru ment Clu ster Lenses
The lenses in front of the instru ments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
Do not use abrasive cleaning components, solvents, steel
wool or other aggressive material to clean the lenses.
1. Clean with a wet soft rag. A mild soap solu tion may be
used , but do not use high alcohol content or abrasive
cleaners. If soap is used , wipe clean with a clean damp
rag.
Glass Surfaces
All glass surfaces shou ld be cleaned on a regu lar basis
with Mop ar
Glass
Cleaner
or
any
commercial
2. Dry with a soft tissu e.
hou sehold -typ e glass cleaner. Never use an abrasive typ e
cleaner. Use caution when cleaning the insid e rear win-
dow equ ipped with electric defrosters or the right rear
quarter wind ow equ ipped with the rad io antenna. Do
not use scrap ers or other sharp instru ments, which may
scratch the elem ents.
Seat Belt Main ten ance
Do not bleach, dye, or clean the belts with chem ical
solvents or abrasive cleaners. This will weaken the fabric. 7
Sun damage can also weaken the fabric.
If the belts need cleaning, use a mild soap solu tion or
lukew arm water. Dry with a soft tissu e. Do not rem ove
the belts from the car to wash them .
When cleaning the rear view mirror, spray cleaner on the
tow el or rag that you are using. Do not spray cleaner
directly on the mirror.
Product Specification
Categories | Jeep Liberty Manuals, Jeep Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |