Starting the diesel engine
To start the diesel engine when the
Vehicle with dual clutch transmis-
sion:
engine is cold, it has to be pre-heat- 1. Make sure the parking brake is
applied.
i Information
•
•
It is best to maintain a moderate
engine speed until the vehicle engine
comes up to normal operating tem-
perature. Avoid harsh or abrupt
acceleration or deceleration while
the engine is still cold.
ed before starting the engine and
then have to be warmed up before
starting to drive.
2.
Make sure the shift lever is in P
(Park).
Vehicle with manual transmission:
3. Depress the brake pedal.
4. Turn the ignition switch to the ON
position to pre-heat the engine.
1.
Make sure the parking brake is
applied.
Always start the vehicle with your
foot on the brake pedal. Do not
depress the accelerator while start- 2. Make sure the shift lever is in neu-
tral.
The glow indicator light (
illuminate.
) will
ing the vehicle. Do not race the
engine while warming it up.
3.
4.
Depress the clutch and brake ped- 5. When the glow indicator light (
)
goes out, turn the key ignition
switch to the START position. Hold
the key (maximum of 10 seconds)
until the engine starts and release
it.
als.
Turn the ignition switch to the ON
position to pre-heat the engine.
5
The glow indicator light (
illuminate.
) will
5.
When the glow indicator light (
)
NOTICE
goes out, turn the key ignition
switch to the START position. Hold
the key (maximum of 10 seconds)
until the engine starts and release
it.
If the engine does not start within
10
seconds after preheating is
turn the ignition
completed,
switch once more to the LOCK
position and wait for 10 seconds.
Then turn the ignition switch to
the ON position in order to pre-
heat the engine again.
5-9
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)