Loosen the lug nuts with the wheel
lug nut wrench and remove them
with your fingers. Remove the
wheel from the studs and lay it flat
on the ground out of the way.
Remove any dirt or debris from
the studs, mounting surfaces, and
Install the spare tire onto the
studs of the hub.
Tighten the lug nuts with your fin-
gers onto the studs with the
smaller end of the lug nuts clos-
est to the wheel.
Lower the vehicle to the ground
by turning the jack handle coun-
Place the jack at the designated 8. Insert the jack handle into the jack
jacking position under the frame and turn it clockwise, raising the
closest to the tire you are chang- vehicle until the tire clears the
ing. The jacking positions are ground. Make sure the vehicle is
plates welded to the frame with stable on the jack.
two notches and two dimples.
Never jack any other position or
part of the vehicle. It may damage
to the side seal molding.
|Categories||Hyundai Manuals, Hyundai Elantra Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Elantra|
|Document File Type|
(0 votes, average: 0 out of 5)