8.
9.
Connect the headlamp bulb sock-
et-connector.
Install the headlamp bulb cover by
turning it clockwise.
5.Insert a new bulb by inserting it into
the socket and rotating it until it
locks into place.
6.Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
i Information
7.Push
the socket into the assembly
The headlamp aiming should be
adjusted after an accident or after the
headlamp assembly is reinstalled at an
authorized HYUNDAI dealer.
and turn the socket clockwise.
Daytime running lamp/
Position lamp/Fog lamp
OAD075033
If the LED lamp does not operate, we
recommend that the system be
checked by an authorized HYUNDAI
dealer.
Turn signal lamp
1.
2.
Open the hood.
Disconnect the negative battery
cable.
3.Remove
the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
7
4.Remove
the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7-87
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)