BRAKE/CLUTCH FLUID (IF EQUIPPED)
Checking the brake/clutch
If the fluid level is excessively low, we
recommend that the system be
checked by an authorized HYUNDAI Before removing the brake/clutch
filler cap, read the warning on the cap.
Use only the specified brake/clutch
fluid. (Refer to “Recommended lubri-
cants and capacities” in chapter 8.)
Clean filler cap before removing.
Use only DOT3 or DOT4 brake/clutch
fluid from a sealed container.
Never mix different types of fluid.
In the event the brake/clutch
system requires frequent addi-
tions of fluid, we recommend
that the system be inspected by
an authorized HYUNDAI dealer.
Check the fluid level in the reservoir
periodically. The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap
and adding brake/clutch fluid, clean
the area around the reservoir cap
thoroughly to prevent brake/clutch
If the level is low, add fluid to the
MAX level. The level will fall with
accumulated mileage. This is a nor-
mal condition associated with the
wear of the brake linings.
|Categories||Hyundai Manuals, Hyundai Elantra Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Elantra|
|Document File Type|
(0 votes, average: 0 out of 5)