STARTING AND OPERATING
361
The pressu re shou ld be checked and adjusted as well as
insp ecting for signs of tire wear or visible damage at least
once a month. Use a good quality pocket-typ e gau ge to
check tire pressu re. DO NOT make a visu al judgem ent
when determ ining prop er inflation. Radial tires may look
prop erly inflated even when they are und er inflated .
inflation pressu re must not exceed the maxim um infla-
tion pressu re molded into the tire sidewall.
Check tire pressu res more often if subject to a wide range
of outdoor tem peratu res, as tire pressu res vary with
tem peratu re changes.
Tire pressu res change by approxim ately 1 psi (7 kPa) per
12 F (7 C) of air tem peratu re change. Keep this in mind
when checking tire pressu re insid e a garage, especially in
the winter.
CAUTIO N!
5
After inspectin g or adjustin g the tire pressu re, al-
ways rein stall the valve stem cap (if equipped). This
will preven t moistu re and dirt from enterin g the
valve stem , which could damage the valve stem .
Example: If garage tem peratu re = 68°F (20°C) and the
outsid e tem peratu re = 32°F (0°C) then the cold tire
inflation pressu re shou ld be increased by 3 psi (21 kPa),
which equ als 1 psi (7 kPa) for every 12 F (7 C) for this
outsid e tem peratu re cond ition.
Inflation pressu res specified on the placard are alw ays
“cold tire inflation pressu re.” Cold tire inflation pressu re
is defined as the tire pressu re after the vehicle has not
been driven for at least three hou rs, or driven less than 1
mi (1.6 km) after a three hou r period . The cold tire
Tire pressu re may increase from 2 to 6 psi (13 to 40 kPa)
during operation. DO NOT red uce this norm al pressu re
buildup or you r tire pressu re will be too low.
Product Specification
Categories | Chrysler Manuals, Chrysler Town and Country Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Looked up a few items and was impressed with how fast it worked. Bought vehicle used and manual was missing. Thanks to this sight I can figure out all these buttons and switches.
good job ........excelent the explain .....