410
WHAT TO DO IN EMERGENCIES
HAZARD WARNING FLASHER
NOTE: With extend ed use, the Hazard Warning Flash-
The hazard flasher switch is located in the center of
the instru ment panel below the rad io.
ers may wear down you r battery.
IF YOUR ENGINE OVERHEATS
In any of the follow ing situ ations, you can red uce the
potential for overheating by taking the approp riate ac-
tion.
To engage the Hazard Warning Flashers, depress the
switch on the instru ment panel. When the Hazard Warn-
ing Switch is activated , all directional turn signals will
flash on and off to warn oncom ing traffic of an emer-
gency. Push the switch a second time to turn off the
flashers.
•
•
On the highw ays — Slow down.
In city traffic — While stop ped, shift the transm ission
gear selector lever into NEUTRAL, but do not increase
engine idle speed .
This is an emergency warning system and shou ld not be
used when the vehicle is in motion. Use it when you r
vehicle is disabled and is creating a safety hazard for
other motorists.
NOTE: There are step s that you can take to slow down
an impend ing overheat cond ition. If you r air cond itioner
is on, turn it off. The air cond itioning system adds heat to
the engine cooling system and turning off the A/ C
rem oves this heat. You can also turn the Temperatu re
control to maxim um heat, the Mod e control to floor, and
When you must leave the vehicle to seek assistance, the
Hazard Warning Flashers will continu e to operate even
thou gh the ignition switch is OFF.
Product Specification
Categories | Chrysler Manuals, Chrysler Town and Country Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Looked up a few items and was impressed with how fast it worked. Bought vehicle used and manual was missing. Thanks to this sight I can figure out all these buttons and switches.
good job ........excelent the explain .....