STARTING AND OPERATING
373
The Basic TPMS consists of the follow ing components:
NOTE: The vehicle may need to be driven for up to 10
minu tes above 15 mph (25 km/ h) to receive this infor-
mation.
•
•
•
Receiver Mod ule
Four Wheel Sensors
The TPMS Warning Lamp will flash on and off for 75
second s, and rem ain on sold when a system fault is
detected . The system fault will also sou nd a chim e. If the
ignition key is cycled , this sequ ence will rep eat, provid -
ing the system fault still exists. The TPMS Warning Lamp
will turn off when the fault cond ition no longer exists. A 5
system fault can occur with any of the follow ing sce-
narios:
TPMS Telltale Warning Light
The TPMS Telltale Warning Light will illumi-
nate in the instru ment cluster, and an audible
chim e will be activated when one or more of
the four active road tire pressu res are low.
Shou ld this occur, you shou ld stop as soon as possible,
check the inflation pressu re of each tire on you r vehicle,
and inflate each tire to the vehicle’s recom mend ed cold
tire pressu re valu e (located on the placard on the
driver’s-sid e B-Pillar). The system will autom atically
update and the TPMS Warning Lamp will extingu ish
once the updated tire pressu res have been received .
1. Jamming due to electronic devices or driving next to
facilities emitting the sam e rad io frequ encies as the TPMS
sensors.
2.
Installing som e form of afterm arket wind ow tinting
that affects rad io wave signals.
Product Specification
Categories | Chrysler Manuals, Chrysler Town and Country Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Looked up a few items and was impressed with how fast it worked. Bought vehicle used and manual was missing. Thanks to this sight I can figure out all these buttons and switches.
good job ........excelent the explain .....