AN HMA 4A.QXP 3/5/2015 3:18 PM Page 66
Features of your vehicle
Rolling code programming
Rolling code devices which are
"code-protected" and manufactured 1. At the garage door opener receiver
after 1996 may be determined by the
To train rolling code devices, follow 3. Return to the vehicle and firmly
these instructions: press, hold for two seconds and
release the desired
button. Repeat the
(motor-head unit) in the garage,
locate the "learn" or "smart" button.
This can usually be found where the
hanging antenna wire is attached to
the motor-head unit. Exact location
and color of the button may vary by
garage door opener brand. If there
"press/hold/release" sequence a
second time to complete the pro-
gramming. (Some devices may
sequence a third time to complete
Reference the device owner's
manual for verification.
The handheld transmitter appears
Universal Transceiver but does not
activate the device.
is difficulty locating the training but- 4. Press and hold the just-trained
HomeLink button and observe
ton, reference the device owner's
manual or please visit our Web site
Firmly press and release the
"learn" or "smart" button (which
activates the "training light").
the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your device should activate.
5. To program the remaining two
buttons, follow either
HomeLink button. The device has
the rolling code feature if the indi-
cator light flashes rapidly and then
turns solid after 2 seconds.
steps 1 through 4 above for other
Rolling Code devices or steps 2
through 5 in Standard Programming
for standard devices.
There are 30 seconds in which to ini-
|Categories||Hyundai Manuals, Hyundai Santa Fe Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Santa Fe|
|Document File Type|
(0 votes, average: 0 out of 5)