2016 Hyundai Santa Fe Sport Owners Manual

AN HMA 3.QXP  3/5/2015  3:09 PM  Page 27
Safety features of your vehicle
Pre-tensioner seat belt
(1) Retractor Pretensioner
The purpose of  the retractor pre-
tensioner is to make sure that the
shoulder belts fit in tightly against
the occupant's upper body in cer-
tain frontal collisions.
(2) EFD (Emergency Fastening Device)
The  purpose  of  the   EFD  is  to
make sure that the pelvis belts  fit
in  tightly against  the  occupant's
lower body in certain frontal  colli-
sions. (for passenger’s side)
To release the seat belt:
The seat belt is released by pressing
the release  button (1)  in the locking
buckle. When it  is released, the  belt
should automatically  draw back  into
the retractor.
If  this does  not  happen,  check  the
belt to be  sure it is not  twisted, then
try again.
If the  system senses  excessive ten-
sion on the driver or passenger's seat
belt  when the  pre-tensioner  system
activates,  the load  limiter inside  the
retractor  pre-tensioner   will  release
some of the pressure on the affected
seat belt.
Your vehicle is equipped with driver's
and  front passenger's  pre-tensioner
seat belts (retractor pretensioner and
EFD (Emergency Fastening Device)).
The pre-tensioner  seat belts  can be
activated, where  the  frontal collision
is severe  enough,  together with  the
air bags.
When the vehicle  stops suddenly, or
if the  occupant tries  to lean  forward
too quickly, the seat belt retractor will
lock  into  position. In  certain  frontal
collisions, the pre-tensioner  will acti-
vate and pull the seat belt into tighter
contact against the occupant's body.
Product Specification
Categories Hyundai Manuals, Hyundai Santa Fe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 763 pages
Document TypeOwners Manual
Product BrandHyundai, Santa Fe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field