AN HMA 7.QXP 3/5/2015 3:25 PM Page 73
Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
Install the headlamp bulb cover by
turning it clockwise.
Always handle them carefully,
and avoid scratches and abra-
sions. If the bulbs are lit, avoid
contact with liquids. Never
touch the glass with bare
hands. Residual oil may cause
the bulb to overheat and burst
when lit. A bulb should be
operated only when installed
in a headlamp.
Always have the headlight aiming
adjusted after an accident or the
headlight assembly is reinstalled at
an authorized HYUNDAI dealer.
If a bulb becomes damaged or
cracked, replace it immediate-
ly and carefully dispose of it.
Wear eye protection when
changing a bulb. Allow the
bulb to cool down before han-
Open the hood.
Remove the headlamp bulb cover
by turning it counterclockwise.
Disconnect the headlamp bulb
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
Remove the bulb by pulling it out.
Inset a new bulb by inserting it into
|Categories||Hyundai Manuals, Hyundai Santa Fe Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Santa Fe|
|Document File Type|
(0 votes, average: 0 out of 5)