AN HMA 4A.QXP 3/5/2015 3:18 PM Page 77
Features of your vehicle
To adjust the position of the mirrors:
Reverse parking aid function
Left or Right : When the outside
rearview mirror con-
trol switch is in the L
(Left) or R (Right)
position, both outside
rearview mirrors will
move downward.
Neutral : When the outside rearview
mirror control switch is in
the neutral (center) posi-
tion, the outside rearview
mirrors will not operate.
1.
Place the ignition switch in the ON (if equipped)
position.
2.
Move the lever(1) to R (right) or L
(left) to select the right side mirror
or the left side mirror.
3.
4.
Press a corresponding point on
the mirror adjustment control to
position the selected mirror up,
down, left or right.
After the adjustment, position the
lever in the center to prevent inad-
vertent movement.
✽
NOTICE
ODM044035N
The outside rearview mirrors will
CAUTION
When you shift the shift lever to the R automatically revert to their original
•
•
The mirrors stop moving when
maximum
angles, but the
(Reverse)
position,
the
outside
positions under the following condi-
tions:
• When the ignition switch or engine
start/stop button is set to the ACC
or OFF position.
they
reach
the
rearview mirror(s) will move down-
adjusting
ward
to
aid
reverse
parking.
motor continues to operate
while the switch is pressed.
Do not press the switch longer
than necessary, the motor
may be damaged.
According to the position of the out-
side rearview mirror control switch
(1),
operate as follows:
the outside rearview mirror(s) will • When the shift lever is moved to
any
position
except
the
R
(Reverse) position.
Do not attempt to adjust the
outside rearview mirror by
hand. Doing so may damage
the mirror.
4
77
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)