2016 Hyundai Santa Fe Sport Owners Manual

AN HMA 4A.QXP  3/5/2015  3:18 PM  Page 67
Features of your vehicle
Gate operator & Canadian pro-
gramming
Reprogramming a single
Erasing HomeLink
®
buttons
Individual buttons cannot be  erased.
During programming,  your handheld     To program  a new device to a  previ-     However,  to   erase   all  three   pro-
HomeLink  button
®
transmitter  may   automatically  stop     ously trained  HomeLink
transmitting.  Continue  to  press  the     low these steps:
®
button, fol-     grammed  buttons:
Press   and  hold   the   two  outer
buttons  until the  indi-
1.
HomeLink
®
cator light begins  to flash-after 20
seconds.
Integrated
HomeLink
®
Wireless
1.
2.
Press
and
®
hold
the
button. Do NOT release
until step 4 has been completed.
When the indicator  light begins to      2. Release both buttons. Do not hold
flash  slowly   (after  20  seconds),
position the handheld transmitter 1
3   inches    away    from    the
desired
Control System button  (note steps 2
HomeLink
through
4
in
the
Standard
Programming  portion  of  this  docu-
ment) while  you press  and re-press
your  handheld  transmitter
for longer than 30 seconds.
("cycle")
The  Integrated  HomeLink
®
Wireless
every two seconds until  the frequen-
cy signal has been learned. The indi-
cator light  will flash  slowly and then
rapidly  after  several  seconds  upon
successful training.
to
Control System is now  in the training
(learn)   mode    and   can   be    pro-
HomeLink  surface.
®
3.
Press   and   hold   the   handheld      grammed  at  any  time  following  the
transmitter button. The HomeLink      appropriate steps in the Programming
indicator light will flash, first slowly     sections above.
and then rapidly.
When the indicator  light begins to
flash rapidly, release both buttons.
Press  and   hold  the   just-trained
®
button   and  observe
the red Status Indicator LED. If the
indicator light  stays on constantly,
programming    is  complete    and
your new device should activate.
®
FCC ID: NZLZTVHL3
IC: 4112A-ZTVHL3
Operating HomeLink
To operate, simply press and release
the programmed  HomeLink
®
4.
5.
®
button.
Activation   will  now   occur   for  the
trained   device   (i.e.   garage   door
opener, gate  operator,  security sys-
tem,  entry   door   lock,  home/office
lighting,  etc.). For  convenience,  the
hand-held  transmitter  of the  device
may also be used at any time.
HomeLink
4
67
Product Specification
Categories Hyundai Manuals, Hyundai Santa Fe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 763 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Santa Fe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field