AN HMA 7.QXP 3/5/2015 3:25 PM Page 25
Steering gear box, linkage &
boots/lower arm ball joint
The use of a non-specified fluid
could result in transaxle mal-
function and failure.
Inspect the parking brake system
including the parking brake lever (or With the vehicle stopped and engine
pedal) and cables.
off, check for excessive free-play in
the steering wheel.
Check the linkage for bends or dam-
age. Check the dust boots and ball
joints for deterioration, cracks, or
damage. Replace any damaged
Use only specified automatic
Brake pads, calipers and
“Recommended lubricants and
capacities” in section 8.)
Check the pads for excessive wear,
discs for run out and wear, and
calipers for fluid leakage.
Brake hoses and lines
Drive shafts and boots
Visually check for proper installation, Suspension mounting bolts
chafing, cracks, deterioration and
any leakage. Replace any deteriorat-
ed or damaged parts immediately.
Check the drive shafts, boots and
Check the suspension connections clamps for cracks, deterioration, or
for looseness or damage. Retighten damage. Replace any damaged
to the specified torque.
parts and, if necessary, repack the
Check brake fluid level in the brake
fluid reservoir. The level should be
between “MIN” and “MAX” marks on
the side of the reservoir. Use only
hydraulic brake fluid conforming to
DOT 3 or DOT 4 specification.
Air conditioning refrigerant/
compressor (if equipped)
Check the air conditioning lines and
connections for leakage and dam-
|Categories||Hyundai Manuals, Hyundai Santa Fe Manuals|
|Document Type||Owners Manual|
|Product Brand||Hyundai, Santa Fe|
|Document File Type|
(0 votes, average: 0 out of 5)